TB 9-4910-745-30
2.
Location of Equipment--Continued
Table 3.
Electrical Components to be Mounted--Continued
Part No. or
Figure
NSN
Qty
Description
no.
11021165
1
CABLE ASSEMBLY, POWER consisting of one each
of the following:
37.50-in. flex. cord (J-C-580)
plug (W-C-596/91)
box connector (W-F-406)
11021166
1
CABLE ASSEMBLY, POWER consisting of one each
of the following:
37.50-in. flex. cord (J-C-580)
connector (W-C-596-92)
box connector (W-F-406)
MS20659-141
28
TERMINAL LUG
5935-01-113-5623
2
CONNECTOR, PLUG: straight, grounding,
2-pole, 3-wire, 30 amp, 125 v, 50/60 Hz
(W-C-596/92)
in. countersunk head machine screws
3. Installation
(MS35190-276), eighteen 7/32-in. flat
washers (MS27183-42), eighteen #10
NOTE
(0.190) lockwashers (MS35338-43), and
Hand blind riveter (5120-00-
eighteen #10 (0.190) hex nuts (MS35649-
973-0376) is used for
202).
installing blind rivet nuts
in unit floors and walls.
(3) Install twelve strap loops on
Install blind rivet nuts in
trailer slats using twenty-four #10 x
accordance with MIL-N-47187.
1-1/4-in. countersunk head machine
screws (MS35190-276), twenty-four 1/4-
a. Units 1 and 2. Mark and drill
in. flat washers (MS27183-9), twenty-
twenty-two 0.25-in. diameter holes and
four 1/4-in. lockwashers (MS35338-44),
install blind rivet nuts (MS27130-A27)
and twenty-four #10 (0.190) hex nuts
in accordance with figures 7 thru 14.
(MS35649-202).
b. Units 1 and 2.
Install strap
(4) Install five strap loops on
loops as follows:
trailer floor using ten #10 x 1-in.
countersunk head machine screws (MS35190-
(1) Install eleven strap loops
275), ten 1/4-in. lockwashers (MS35338-
(MS51939-3) on truck and trailer walls
44), and ten #10 (0.190) hex nuts
using twenty-two #10 x 1-in. counter-
(MS35649-202).
sunk head machine screws (MS35190-275)
for threading into blind rivet nuts.
(2) Install nine strap loops on
truck slats using eighteen #10 x 1-1/4-
9
