TB 9-4910-745-30
3. Installation--Continued
sulation from each individual wire and
twist wire to fit terminal lug (MS20659-
141). Install terminal lug and crimp.
(8) Install a 14-foot length of
Connect wipes to duplex receptacles and
flexible cord (6145-00-295-0855) through
secure duplex receptacles to duplex
duplex junction boxes and lampholder
junction boxes with screws provided
junction boxes on second and third
with duplex receptacles.
bows. Refer to figure 18. Strip a 3-
inch length of outside insulation from
(11) Install four duplex junction
flexible cord on inside of each junc-
box covers (5975-00-682-0357) to duplex
tion box. Strip 1 inch of insulation
junction boxes and secure with screws
from each individual wire and twist
provided in covers. Refer to figure
wire to fit terminal lug (MS20659-141).
Install and crimp terminal lug in
place.
(12) Tighten all strain relief box
(9) Connect three wires to
connectors to secure flexible cords in
lampholder (GE-5740-7) and secure to
junction boxes and switch box. Refer
lampholder junction box. Repeat this
to figure 16.
step for remaining three lampholder
junction boxes. Refer to figures 16
(13) Secure power cable assemblies
and 17.
to bows and truck rack with twenty-
eight 12.00-in. tiedown straps (MS3367-
(10) Install four duplex recep-
3) in accordance with figures 15, 16,
tacles 5935-01-058-9265) by stripping
and 17.
3 inches of outside insulation from
flexible cord. Strip 1 inch of in-
14
