TB 9-4940-314-30
holes in storage cabinet wall. Secure right-hand bench
4. Installation--Continued
support to 20-drawer storage cabinet wall, using two
5/16- x 7/8-in. pan head machine screws (MS35206-
left rear wall-mounted #10 blind rivet nuts in accordance
297), two 5/16-in. lockwashers (MS35338- 45), and two
with figure 7. Secure general purpose first aid kit, using
5/16-in. hex nuts (MS51967- 5).
three #10 x 1/2-in. countersunk head machine screws
(MS35190-271). Reinstall contents of general purpose
CAUTION
first aid kit.
Be sure storage cabinet drawers adjacent to
(12) Position engine distributor tester (4910-00-
hole locations are removed before drilling.
392-2939) on left-side bench top in accordance with
(15) Position 10-drawer storage cabinet (7125-
through engine distributor tester bottom. Using the
00-999-1122) on right rear side of 280 shelter in
engine distributor tester as a template, mark and drill
accordance with figure 4. Position fabricated right-hand
four 0.22-in. diameter pilot holes through left-side bench
bench support and fabricated left-hand bench support
top. Secure engine distributor tester to left-side bench
against walls of 10-drawer storage cabinet in accordance
top, using four 5/16- x 1-in. hex head lag bolts
(MS16992-520), four 11/32-in. flat washers (MS27183-
and left-hand bench support as templates, mark and drill
12), and four 5/16-in. lockwashers (MS35338-45).
four 0.34-in. diameter holes in 10-drawer storage cabinet
(13) Position general mechanic tool kit (5180-
walls. Secure left-hand bench support to 10- drawer
00-669-5273) on left- side bench top in accordance with
storage cabinet, using two 5/16- x 7/8-in. pan head
machine
screws
(MS35206-297),
two
5/16-in.
(7550588-1) in accordance with figure 2.
lockwashers (MS35338-45), and two 5/16-in. hex nuts
(MS51967-5).
CAUTION
(16) Position fabricated shelf between right-hand
Be sure storage cabinet drawers adjacent to
bench support and 280 shelter rear wall in accordance
hole locations are removed before drilling.
support to 10-drawer storage cabinet, using two 5/16- x
(14) Position storage cabinet (7125-00-991-
7/8- in. pan head machine screws (MS35206- 297), two
2857), and 20-drawer storage cabinet (7125-00-999-
5/16-in. lockwashers (MS35338- 45), and two 5/16-in.
1123) on front right side of 280 shelter in accordance
hex nuts (MS51967- 5). Position free end of shelf over
shelf support, which is positioned over wall-mounted 5/16
support against 20-drawer storage cabinet in accordance
Secure shelf support to wall, Using two 5/16- x 7/8-in.
accordance with figure 3. Using right-hand bench
pan head machine screws (MS35206-297) and two 5/16-
support as a template, mark and drill two 0.34-in.
in. lock- washers (MS35338-45).
diameter
10
