0004 00
TM 1-4920-433-13&P
Table 1. Oil/Water Separator Controls and Indicators.
Key
Control/Indicator
Function
1
Left Hand Regulated Air Flow
Used to measure the output air pressure for the left hand side of the
Gauge
oil/water separator. Measures from a minimum of 0 pounds per square
inch (psi) to a maximum of 160 psi.
2
Supply Air Input
Used to connect air source to the oil/water separator.
3
Supply Air Flow Gauge
Used to measure the air being supplied to the oil/water separator.
Measures from a minimum of 0 psi to a maximum of 200 psi.
4
Right Hand Regulated Air Flow
Used to measure the output air pressure for the right hand side of the
Gauge
oil/water separator. Measures from a minimum of 0 psi to a maximum of
160 psi.
Used to adjust the output psi for the right hand regulated air. Turn
5
Right Hand Regulator
Adjustment
clockwise to increase the output psi, turn counterclockwise to decrease
the output psi.
6
Right Hand Regulated Output
Used to turn on and turn off the output air for the right hand regulated air.
Ball Valve
7
Non-Regulated Supply Air
Used to turn on and turn off the output air for the oil/water separator
Output Ball Valve
non-regulated air.
8
Left Hand Regulator Adjustment
Used to adjust the output psi for the left hand regulated air. Turn clockwise
to increase the output psi, turn counterclockwise to decrease the output
psi.
9
Left Hand Regulated Output Ball
Used to turn on and turn off the output air for the left hand regulated air.
Valve
10
Oil/Water Bleed Off Valve
Used to bleed off excess oil/water contained within the oil/water separa-
tor. Turn bleed off valve counterclockwise to drain. Turn bleed off valve
clockwise to close.
0004 00-2
