TM 1-4920-440-13&P
0050 00
INSTALLATION CONTINUED
ECU POWER CABLE CONTINUED
Figure 3.
Replacing ECU Power Cable.
NOTE
When ECU power cable (Figure 3, Item 1) has been pulled completely out of ixed roof beam
(Figure 3, Item 2), there should be an adequate amount of twine/rope left at circuit breaker box
end to allow for pulling twine/rope back through with new ECU power cable (Figure 3, Item 1)
attached.
3.
Pull electrical connector end of ECU power cable (Figure 3, Item 1) through ixed roof beam (Figure 3, Item
2).
4.
Remove twine/rope and attach to new ECU power cable (Figure 3, Item 1)
0050 00-5