TM 1-4920-441-13&P
0039 00
REMOVAL CONTINUED
CABINETS (C), (D) AND (E) HARDWARE (1036058) CONTINUED
6.
Remove bolt (Figure 3, Item 5), lock washer (Figure 3, Item 6), and lat washers (Figure 3, Item 7) detaching
six drawer cabinet (C) (Figure 3, Item 9) from shelter wall.
7.
Repeat Step 6 to remove shelf cabinet (D) (Figure 3, Item 1), shelf cabinet (E) (Figure 3, Item 2), six drawer
cabinet (E (Figure 3, Item 3) and three drawer cabinet (D) (Figure 3, Item 8) from shelter wall.
INSTALLATION
CABINETS (C), (D) AND (E) HARDWARE (1036058)
1.
Install bolt (Figure 3, Item 5), lock washer (Figure 3, Item 6), and lat washer (Figure 3, Item 7) securing three
drawer cabinet (D) (Figure 3, Item 8) to shelter wall.
2.
Repeat Step 1 to secure six drawer cabinet (E) (Figure 3, Item 3), shelf cabinet (E) (Figure 3, Item 2), and
shelf cabinet (D) (Figure 3, Item 1), and six drawer cabinet (C) (Figure 3, Item 9) to shelter wall.
Torque bolts (Figure 3, Item 5) 160-190 in. lbs.
3.
4.
Install four bolts (Figure 3, Item 5), four lock washers (Figure 3, Item 6), and four lat washers (Figure 3, Item
7) securing two cabinet brackets (Figure 3, Item 4) to shelter loor.
Torque bolts (Figure 3, Item 5) 160-190 in. lbs.
5.
6.
Install bolt (Figure 3, Item 5), lock washer (Figure 3, Item 6), and lat washer (Figure 3, Item 11) securing open
bench leg (Figure 3, Item 10) to shelter loor.
Torque bolts (Figure 3, Item 5) 160-190 in. lbs.
7.
CAUTION
The lag bolt installed in the rear open bench leg does not have a torque speciication of 160-190
in. lbs.
8.
Install lag bolt (Figure 3, Item 13), lock washer (Figure 3, Item 6), and lat washer (Figure 3, Item 11) securing
open bench leg (Figure 3, Item 12) to shelter loor.
9.
Install drawers, slides, and shelves as necessary IAW WP 0038 00, Drawers, Slides, And Shelves,
INSTALLATION .
10. Install kick plate IAW WP 0038 00, Kick Plate, INSTALLATION .
0039 00-7
