TM 1-4920-500-13&P
0005 00
WARNINGS
Load balancer is a spring powered mechanism. PERSONAL INJURY
OR DEATH may result if two quick release pins are not installed in stop
plates.
Hinged floor support cables must be secured in cable housing guide prior
to lowering shelter floor. If support cables are not secured, support
cables will remain under tension. DO NOT attempt to remove cables if
support cables are not secured. Removing cables while under tension
could cause SERIOUS INJURY to personnel.
2
1
3
2
1
3
4
4
SSAE009
6. Remove lockout pins (4) from upper position on both load balancers (3).
7. Close slide stops (1) against support cables (2) on both load balancers (3).
8. Install lockout pins (4) in lower position on both load balancers (3).
0005 00-6