TM 1-4940-355-12&P
This WP supersedes WP 0020 00, dated 2 September 2003
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
ASSEMBLY OF MAJOR COMPONENTS
INITIAL SETUP
Personnel Required:
Tools and Special Tools:
Six MOS 67 Series or MOS 68 Series
Tool Kit Acft. Maint, B01 (Table 2, WP 0025 00)
Equipment Conditions:
References:
SECM Removed From HMMWV
Service Upon Receipt (WP 0009 00)
Maintenance Allocation Chart (Table 1, WP 0025 00)
Repair Parts and Special Tools List (WP 0027 00)
TM 9-2320-280-10, TRUCK, UTILITY: HEAVY
VARIANT, 4X4, M1097 (2320-01-346-9317) (EIC:
BBM); M1097A1
VEHICLE PREPARATION
1. Verify HMMWV is prepared to receive SECM according to WP 0009 00, Service Upon Receipt.
2. Chock wheels and set brakes.
INSTALLATION
1. Lay out and inventory SECM container components as listed in Table 1, WP 0030 00.
2. Install new rear cab curtain loosely. (Figure 1) Do not tighten until main box is installed. Follow instructions
contained in TM 9-2320-280-10.
MS019474
Figure 1. Rear Cab Curtain Installation
0020 00- 1
Change 1 15 March 2005
