(2) Inspect the lifting eye and top cover for
dents, cracks, or damaged threads. Re-
place a damaged cover or lifting eye.
c. Installation.
(1) Refer to figure 49 and install the generator-
welder top cover and lifting eye (Modcl
SECM).
(2) Refer to figure 50 and install the lifting eye
and generator-welcler top cover (Model
CMU-5).
76. Ventilating Fan Guard
a Removal.
(1) Refer to figure 51 and remove the ven-
Figure 49. Lifting eye and generator-welder top cover, Model
tilating fan guard from the generator-
SECM, removal and installation.
welder (Modcl SECM).
b. Cleaning and Inspection.
(2) Refer to figure 52 and remove the venti-
(1) Clean the parts with an approved cleaning
lating fan guard from the generator-welder
solvent and dry thoroughly.
(Model CMU-5).
77
TAGO 5672-A
