4-15. Ceiling and Blackout Light
(3) Install new lamp (2), position assembled
door on the body and secure with screw (8).
a. Incandescent Lamp Replacement.
b. Removal and Installation.
(1) Remove screw (8) and separate the
(1) Disconnect electrical lead.
assembled door from the body as shown in figure 4-
(2) Remove screw (4) and remove the light
4.
assembly,
(2) Remove the lamp (2) from the lamp holder
(3) Position the light assembly against the
(2) by pressing in and rotating the lamp one-
panel and secure with screw (4).
quarter turn.
(4) Connect electrical lead.
