TM 10-5411-236-13&P
0006 00
CAUTION
Ensure the lock rods have been completely retracted prior to removing or inserting the
pallets.
3. Once approximately 12-inches into the pallet ledge, lower the pallet and allow it to slide along the
pallet ledge into the lock position.
5. Tighten the lock rods evenly using 7/8-inch deep well socket and -inch drive flex head wrench to
secure the front of the pallets.
NOTE
Alternate tightening left to right to ensure proper alignment of pallet on pallet ledges.
6. Tighten jam nut using 7/8-inch combination wrench to hold lock rod in the closed position.
0006 00-13
Change 1