(4) Rotate machinist's vise (6) located on right table (7) 90 degrees
clockwise to stowed position (jaws perpendicular to table) and tighten.
Injury to personnel may result if pressure is not relieved
before beginning any maintenance on airhose.
(2) Disconnect compressed air source from quick-disconnect male
coupling assembly (1) on end of airhose. Then disconnect quick disconnect
female coupling assembly (2) of air hose from quick-disconnect male
coupling assembly (3) on exterior shelter wall.
(5) Remove sorting file (8) from wall shelving (9) and place on
(3) Loosen and lower the head and movable base of the drilling
cargo door end of left table (10) with two straps (11).
machine (4) on storage cabinet (5) and swing the head and base 90 degrees
counterclockwise and tighten.