0036 00
TM 1-4920-433-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
SHELF CABINET (G) CONTINUED
1.
Inspect shelf cabinet assembly and work surface (Figure 6) for damage. Replace as necessary.
2.
Inspect all shelf cabinet assembly hardware (Figure 6, Item 1, 2, 3, 4, 8 and 9) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
SHELF CABINET (G)
1.
Remove kick plate IAW (Kick Plate, REMOVAL).
2.
Remove drawers, slides, and shelves as necessary IAW (Drawers, Slides, And Shelves, REMOVAL).
3.
Remove hardware attaching shelf cabinet (G) (Figure 6, Item 6) to shelter loor IAW (WP 0037 00, Cabinet
(G) Hardware, REMOVAL).
4.
Remove eight lag bolts (Figure 6, Item 1), eight lock washers (Figure 6, Item 2), six large lat washers (Figure
6, Item 3), and two small lat washers (Figure 6, Item 4) detaching work surface (Figure 6, Item 5) from shelf
cabinet (G) (Figure 6, Item 6).
5.
Remove work surface (Figure 6, Item 5) from top of shelf cabinet (G) (Figure 6, Item 6).
6.
Remove four bolts (Figure 6, Item 8), eight lat washers (Figure 6, Item 4), four lock washers (Figure 6, Item
2), and four nuts (Figure 6, Item 9) detaching two cabinet brackets (Figure 6, Item 7) from shelf cabinet (G)
(Figure 6, Item 6).
REPAIR OR REPLACEMENT
SHELF CABINET (G)
1.
If cabinet brackets (Figure 6, Item 7) can be repaired by welding, weld damaged area IAW TM 1-1500-204-23.
Repair must not interfere with form, it, or function of cabinet brackets (Figure 6, Item 7).
2.
Paint repaired cabinet brackets (Figure 6, Item 7) IAW (WP 0058 00, Figure 1).
INSTALLATION
SHELF CABINET (G)
1.
If a new shelf cabinet (G) (Figure 6, Item 6) must be installed:
a.
On top left side of shelf cabinet (G) (Figure 6, Item 6), measure from front existing bolt hole toward back
12.25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 6, Item 13).
b.
On top back side of shelf cabinet (G) (Figure 6, Item 6), measure from left existing bolt hole toward right
13 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement mark
and mark measurement (Figure 6, Item 10).
c.
On top right side of shelf cabinet (G) (Figure 6, Item 6), measure from front existing bolt hole toward back
12-25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 6, Item 11).
d.
On top front side of shelf cabinet (G) (Figure 6, Item 6), measure from left existing bolt hole toward right
13 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement mark
and mark measurement (Figure 6, Item 12).
e.
Center punch and drill four 13/32 inch holes.
2.
If a new work surface (Figure 6, Item 5) must be installed:
a.
Position work surface (Figure 6, Item 5), inished side up, on top of shelf cabinet (G) (Figure 6, Item 6).
0036 00-14
