TM 1-4920-435-13&P
0056 00
REMOVAL CONTINUED
2.
Remove four screws (Figure 2, Item 3) attaching power entry panel cover (Figure 2, Item 1) to power entry
panel which is located below circuit breaker panel.
3.
Remove power entry panel cover (Figure 2, Item 1) from power entry panel.
4.
Remove damaged BNC connector (Figure 2, Item 2) attached to power entry panel by twisting BNC cable
connector (Figure 2, Item 4) counter clockwise.
5.
Remove damaged BNC connector (Figure 2, Item 2) attached to power entry panel cover (Figure 2, Item 1)
by twisting BNC cable connector (Figure 2, Item 4) counter clock- wise.
6.
Remove damaged cable (Figure 2, Item 2).
INSTALLATION
1.
Install new BNC connector (Figure 2, Item 2) on power entry panel cover (Figure 2, Item 1) by twisting BNC
cable connector (Figure 2, Item 4) clockwise.
2.
Install new BNC Connector (Figure 2, Item 2) into power entry panel by twisting BNC cable connector (Figure
2, Item 4) clockwise.
3.
Install power entry panel cover (Figure 2, Item 1) using four screws (Figure 2, Item 3).
4.
Move main circuit breaker to ON position.
END OF WORK PACKAGE
0056 00-3/4 blank