0037 00
TM 1-4920-436-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
CONNECTOR PLUG CONTINUED
WARNING
HIGH VOLTAGE exists in electrical system of shop. All electrical inspections, repairs, or
replacements will be performed with power OFF and only by a qualiied electrician. Serious
shock hazards exist which could result in INJURY OR EVEN DEATH to personnel.
Figure 2.
Continuity Check on Plug Connector.
TEST AND INSPECTION
Check for continuity. If an electrical problem is discovered, replace 240V connector plug.
REMOVAL
1.
Loosen two screws from body of 240V connector plug housing.
2.
Loosen three screws from face of 240V connector plug.
3.
Pull 240V connector plug apart and disconnect wires from "X", "Y", and ground terminals.
0037 00-2
