TM 1-4920-436-13&P
FIELD MAINTENANCE
ENGINE SHOP
MAINTENANCE INSTRUCTIONS FOR EYEWASH STATION ASSEMBLY BRACKET AND HARDWARE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
CMF 15 Series (2)
General Mechanics Tool Kit
(WP 0060 00, Table 2, Item 104 )
References
Torque Wrench, 0-600 in. lbs
Sperian Fendall Pure Flow 1000 Eyewash Station
(WP 0060 00, Table 2, Item 109 )
Owner s Manual
Materials/Parts
Equipment Condition
Fountain, Eye and Face Wash (WP 0066 00, Item 4)
Eyewash Station Removed
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Eyewash Station.
1.
Inspect eyewash station bracket (Figure 1, Item 4) for damage. Replace as necessary.
2.
Inspect eyewash station bracket hardware (Figure 1, Item 1 through 3) for rust, cracks and rounded heads.
Replace as necessary.
REMOVAL
1.
If necessary, drain eye and face wash fountain solution IAW with Eyewash Station Owner s Manual.
2.
Remove two bolts (Figure 1, Item 1), two lock washers (Figure 1, Item 2), two lat washers (Figure 1, Item 3),
and eyewash station bracket (Figure 1, Item 4).
INSTALLATION
1.
Position eyewash station bracket (Figure 1, Item 4) by aligning bolt holes with wall inserts.
0036 00-1