TM 1-4920-438-13&P
0043 00
INSTALLATION CONTINUED
a.
Measure from left side of degreaser (Figure 1, Item 1) leg towards right 0.50 inch and position new
bracket (Figure 1, Item 5) at measurement on degreaser (Figure 1, Item 1) leg and lush against the loor.
Mark hole placement.
b.
Measure from right side of degreaser (Figure 1, Item 1) leg towards left 0.50 inch and position new
bracket (Figure 1, Item 5) at measurement on degreaser (Figure 1, Item 1) leg and lush against the loor.
Mark hole placement.
c.
Repeat steps a and b for opposite degreaser (Figure 1, Item 1) leg.
d.
Center punch and drill four 7/16 inch holes through degreaser (Figure 1, Item 1) legs.
2.
Install four bolts (Figure 1, Item 2), eight lat washers (Figure 1, Item 4), four lock washers (Figure 1, Item 3),
and four nuts (Figure 1, Item 6) attaching brackets (Figure 1, Item 5) to degreaser legs.
3.
Install four bolts (Figure 1, Item 2), four lock washers (Figure 1, Item 3), and four lat washers (Figure 1, Item
4) attaching brackets (Figure 1, Item 5) to loor.
4.
Torque bolts (Figure 1, Item 2) 160-190 in lbs.
END OF WORK PACKAGE
0043 00-3/4 blank
