TM 1-4920-441-13&P
0038 00
INSPECTION OF INSTALLED ITEMS CONTINUED
6 DRAWER CABINET (F) (1036058) CONTINUED
NOTE
Six drawer cabinet (F) is an additional cabinet installed in the 1036058 coniguration. The
SC4920-99-CLA69 coniguration does not contain this cabinet assembly.
1.
Inspect cabinet assembly and work surface (Figure 6) for damage. Replace as necessary.
2.
Inspect all shelf cabinet assembly hardware (Figure 6, Item 1, 2, 3, 4, 8 and 9) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
6 DRAWER CABINET (F) (1036058)
1.
Remove kick plate IAW Kick Plate, REMOVAL.
2.
Remove drawers, slides, and shelves as necessary IAW Drawers, Slides, And Shelves, REMOVAL.
3.
Remove hardware attaching six drawwer cabinet (F) (Figure 6, Item 6) to shelter loor IAW WP 0039 00,
Cabinets (F) Hardware (1036058), REMOVAL.
4.
Remove eight lag bolts (Figure 6, Item 1), eight lock washers (Figure 6, Item 2), six large lat washers (Figure
6, Item 3), and two small lat washers (Figure 6, Item 4) detaching work surface (Figure 6, Item 5) from six
drawer cabinet (F) (Figure 6, Item 6).
5.
Remove work surface (Figure 6, Item 5) from top of six drawer cabinet (F) (Figure 6, Item 6).
6.
Remove four bolts (Figure 6, Item 8), eight lat washers (Figure 6, Item 4), four lock washers (Figure 6, Item
2), and four nuts (Figure 6, Item 9) detaching two cabinet brackets (Figure 6, Item 7) from six drawer cabinet
(F) (Figure 6, Item 6).
REPAIR OR REPLACEMENT
6 DRAWER CABINET (F) (1036058)
1.
If cabinet brackets (Figure 6, Item 7) can be repaired by welding, weld damaged area IAW TM 1-1500-204-23.
Repair must not interfere with form, it, or function of cabinet brackets (Figure 6, Item 7).
2.
Paint repaired cabinet brackets (Figure 6, Item 7) IAW WP 0055 00, Figure 1.
INSTALLATION
6 DRAWER CABINET (F) (1036058)
1.
If a new six drawer cabinet (F) (Figure 6, Item 6) must be installed:
a.
On top left side of six drawer cabinet (F) (Figure 6, Item 6), measure from front existing bolt hole toward
back 12.25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new place-
ment mark and mark measurement (Figure 6, Item 13).
b.
On top back side of six drawer cabinet (F) (Figure 6, Item 6), measure from left existing bolt hole toward
right 13 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 6, Item 10).
c.
On top right side of six drawer cabinet (F) (Figure 6, Item 6), measure from front existing bolt hole
toward back 12.25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new
placement mark and mark measurement (Figure 6, Item 11).
d.
On top front side of six drawer cabinet (F) (Figure 6, Item 6), measure from left existing bolt hole toward
right 13.00 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 6, Item 12).
e.
Center punch and drill four 13/32 inch holes.
0038 00-13