0038 00
TM 1-4920-441-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
3 DRAWER CABINET (G) AND 6 DRAWER CABINET (H) (1036058). 3 DRAWER CABINET (F) AND 6 DRAWER
CABINET (G) (SC4930-99-CLA99) CONTINUED
2.
Inspect all cabinet assembly hardware (Figure 7, Item 2, 3, 4, 12, 13, and 15) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
3 DRAWER CABINET (G) AND 6 DRAWER CABINET (H) (1036058). 3
DRAWER CABINET (F) AND 6 DRAWER CABINET (G) (SC4930-99-CLA99)
1.
Remove kick plate IAW (Kick Plate, REMOVAL.
2.
Remove drawers, slides, and shelves as necessary IAW Drawers, Slides, And Shelves, REMOVAL.
3.
Remove hardware attaching three drawwer cabinet (G) (Figure 7, Item 7) and six drawer cabinet (H) (Figure
7, Item 6) to shelter loor IAW WP 0039 00, Cabinet (G) and (H) Hardware, REMOVAL.
4.
Remove four lag bolts (Figure 7, Item 4), four lock washers (Figure 7, Item 3), and four lat washers (Figure
7, Item 2) detaching work surface (Figure 7, Item 11) from three drawer cabinet (G) (Figure 7, Item 7) and six
drawer cabinet (H) (Figure 7, Item 6).
5.
Remove work surface (Figure 7, Item 11) from top of three drawer cabinet (G) (Figure 7, Item 7) and six
drawer cabinet (H) (Figure 7, Item 6).
6.
Remove four bolts (Figure 7, Item 12), eight lat washers (Figure 7, Item 13), four lock washers (Figure 7, Item
3), and four nuts (Figure 7, Item 15) detaching two cabinet brackets (Figure 7, Item 14) from three drawer
cabinet (G) (Figure 7, Item 7) and six drawer cabinet (H) (Figure 7, Item 6).
7.
Remove four bolts (Figure 7, Item 12), eight lat washers (Figure 7, Item 2), four lock washers (Figure 7, Item
3), and four nuts (Figure 7, Item 15) detaching three drawer cabinet (G) (Figure 7, Item 7) from six drawer
cabinet (H) (Figure 7, Item 6).
REPAIR OR REPLACEMENT
3 DRAWER CABINET (G) AND 6 DRAWER CABINET (H) (1036058). 3
DRAWER CABINET (F) AND 6 DRAWER CABINET (G) (SC4930-99-CLA99)
1.
If cabinet brackets (Figure 7, Item 14) can be repaired by welding, weld damaged area IAW TM
1-1500-204-23. Repair must not interfere with form, it, or function of cabinet brackets (Figure 7, Item 14).
2.
Paint repaired cabinet brackets (Figure 7, Item 14) IAW WP 0055 00, Figure 1.
INSTALLATION
3 DRAWER CABINET (G) AND 6 DRAWER CABINET (H) (1036058). 3
DRAWER CABINET (F) AND 6 DRAWER CABINET (G) (SC4930-99-CLA99)
1.
Install four bolts (Figure 7, Item 12), eight lat washers (Figure 7, Item 2), four lock washers (Figure 7, Item 3),
and four nuts (Figure 7, Item 15) securing three drawer cabinet (G) (Figure 7, Item 7) to six drawer cabinet
(H) (Figure 7, Item 6).
2.
If a new work surface (Figure 7, Item 11) must be installed:
a.
Position work surface (Figure 7, Item 11), inished side up, on top of three drawer cabinet (G) (Figure 7,
Item 7) and six drawer cabinet (H) (Figure 7, Item 6).
b.
Ensure work surface (Figure 7, Item 11) is lush with back sides of three drawer cabinet (G) (Figure 7,
Item 7) and six drawer cabinet (H) (Figure 7, Item 6).
c.
On inside of six drawer cabinet (H) (Figure 7, Item 6), mark three hole placements (Figure 7, Item 8, 9,
and 10) in top of cabinet on non-inished side of work surface (Figure 7, Item 11).
d.
After three hole placement marks (Figure 7, Item 8, 9, and 10) have been made, lip work surface (Figure
7, Item 11) over with non-inished side up.
0038 00-16