0014
TM 1-4920-924-13&P
AVIATION SHOP EQUIPMENT CONTACT MAINTENANCE (AV SECM) SYSTEM MAINTENANCE
INSTRUCTIONS FOR STRAP FASTENER LOOPS - (CONTINUED)
5.
At marked measurement (Figure 9, Item 13) position left side mounting hole (Figure 9, Item 1) of strap
fastener loop (Figure 9, Item 2) center on marked measurement (Figure 9, Item 13).
6.
Center punch left and right side mounting hole (Figure 9, Item 1) of strap fastener loop (Figure 9, Item 2)
onto slide out shelf assembly (Figure 9, Item 16).
7.
On front side of slide out shelf assembly (Figure 9, Item 16) measure from left edge of slide out shelf assembly
(Figure 9, Item 16) towards right 29.31 inches and from top of slide out shelf assembly (Figure 9, Item 16)
towards bottom 0.75 inches and mark measurement (Figure 9, Item 11).
8.
At marked measurement (Figure 9, Item 11) position left side mounting hole (Figure 9, Item 1) of strap
fastener loop (Figure 9, Item 2) center on marked measurement (Figure 9, Item 11).
9.
Center punch left and right side mounting hole (Figure 9, Item 1) of strap fastener loop (Figure 9, Item 2)
onto slide out shelf assembly (Figure 9, Item 16).
10.
Remove strap fastener loops (Figure 9, Item 2) and drill one 3/16 inch hole at six center punched marks
(Figure 9, Item 10, 11, 12, 13, 14 and 15).
11.
Install three strap fastener loops (Figure 9, Item 2) to slide out shelf assembly (Figure 9, Item 16) by
installing six 11/64 inch blind rivets (Figure 9, Item 3) into mounting holes (Figure 9, Item 1) of three strap
fastener loops (Figure 9, Item 2).
12.
On back side of slide out shelf assembly (Figure 9, Item 16) measure from right edge of slide out shelf
assembly (Figure 9, Item 16) towards left 8.06 inches and from top of slide out shelf assembly (Figure 9, Item
16) towards bottom 0.75 inches and mark measurement (Figure 9, Item 9).
13.
At marked measurement (Figure 9, Item 9) position right side mounting hole (Figure 9, Item 1) of strap
fastener loop (Figure 9, Item 2) center on marked measurement (Figure 9, Item 9).
14.
Center punch right and left side mounting hole (Figure 9, Item 1) of strap fastener loop (Figure 9, Item 2)
onto slide out shelf assembly (Figure 9, Item 16).
15.
On back side of slide out shelf assembly (Figure 9, Item 16) measure from right edge of slide out
shelf assembly (Figure 9, Item 16) towards left 18.69 inches and from top of slide out shelf assembly
(Figure 9, Item 16) towards bottom 0.75 inches and mark measurement (Figure 9, Item 7).
16.
At marked measurement (Figure 9, Item 7) position right side mounting hole (Figure 9, Item 1) of strap
fastener loop (Figure 9, Item 2) center on marked measurement (Figure 9, Item 7).
17.
Center punch right and left side mounting hole (Figure 9, Item 1) of strap fastener loop (Figure 9, Item 2)
onto slide out shelf assembly (Figure 9, Item 16).
18.
On back side of slide out shelf assembly (Figure 9, Item 16) measure from right edge of slide out
shelf assembly (Figure 9, Item 16) towards left 29.31 inches and from top of slide out shelf assembly
(Figure 9, Item 16) towards bottom 0.75 inches and mark measurement (Figure 9, Item 5).
19.
At marked measurement (Figure 9, Item 5) position right side mounting hole (Figure 9, Item 1) of strap
fastener loop (Figure 9, Item 2) center on marked measurement (Figure 9, Item 5).
20.
Center punch right and left side mounting hole (Figure 9, Item 1) of strap fastener loop (Figure 9, Item 2)
onto slide out shelf assembly (Figure 9, Item 16).
21.
Remove strap fastener loops (Figure 9, Item 2) and drill one 3/16 inch hole at six center punched marks
(Figure 9, Item 4, 5, 6, 7, 8 and 9).
22.
Install three strap fastener loops (Figure 9, Item 2) to slide out shelf assembly (Figure 9, Item 16) by
installing six 11/64 inch blind rivets (Figure 9, Item 3) into mounting holes (Figure 9, Item 1) of three strap
fastener loops (Figure 9, Item 2).
001413