0014
TM 1-4920-924-13&P
AVIATION SHOP EQUIPMENT CONTACT MAINTENANCE (AV SECM) SYSTEM MAINTENANCE
INSTRUCTIONS FOR STRAP FASTENER LOOPS - (CONTINUED)
Roadside Rack Assembly First Shelf
12
11
13
9 10
78
56
34
2
1
23
22
21
20 19 18
17
16
15
14
SECM0073
Figure 7. Roadside Rack Assembly First Shelf
1.
On top of rear aluminum rail (Figure 7, Item 2) measure from outside edge of corner casting (Figure 7, Item
1) from left towards right 10.44 inches and from front of aluminum rail (Figure 7, Item 2) towards back 0.75
inches and mark measurement (Figure 7, Item 3).
2.
At marked measurement (Figure 7, Item 3) position left side mounting hole (Figure 7, Item 11) of strap
fastener loop (Figure 7, Item 12) center on marked measurement (Figure 7, Item 3).
3.
Center punch left and right side mounting hole (Figure 7, Item 11) of strap fastener loop (Figure 7, Item 12)
onto aluminum rail (Figure 7, Item 2).
4.
On top of rear aluminum rail (Figure 7, Item 2) measure from outside edge of corner casting (Figure 7, Item
1) from left towards right 17.44 inches and from front of aluminum rail (Figure 7, Item 2) towards back 0.75
inches and mark measurement (Figure 7, Item 5).
5.
At marked measurement (Figure 7, Item 5) position left side mounting hole (Figure 7, Item 11) of strap
fastener loop (Figure 7, Item 12) center on marked measurement (Figure 7, Item 5).
6.
Center punch left and right side mounting hole (Figure 7, Item 11) of strap fastener loop (Figure 7, Item 12)
onto aluminum rail (Figure 7, Item 2).
7.
On top of rear aluminum rail (Figure 7, Item 2) measure from outside edge of corner casting (Figure 7, Item
1) from left towards right 24.44 inches and from front of aluminum rail (Figure 7, Item 2) towards back 0.75
inches and mark measurement (Figure 7, Item 7).
00148