0014
TM 1-4920-924-13&P
AVIATION SHOP EQUIPMENT CONTACT MAINTENANCE (AV SECM) SYSTEM MAINTENANCE
INSTRUCTIONS FOR STRAP FASTENER LOOPS - (CONTINUED)
8.
At marked measurement (Figure 10, Item 16) position left side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 16).
9.
Center punch left and right side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item 10)
onto slide out shelf assembly (Figure 10, Item 14).
10.
On front side of slide out shelf assembly (Figure 10, Item 14) measure from left edge of slide out shelf
assembly (Figure 10, Item 14) towards right 37.94 inches and from top of slide out shelf assembly
(Figure 10, Item 14) towards bottom 0.78 inches and mark measurement (Figure 10, Item 13).
11.
At marked measurement (Figure 10, Item 13) position left side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 13).
12.
Center punch left and right ft side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item
10) onto slide out shelf assembly (Figure 10, Item 14).
13.
Remove strap fastener loops (Figure 10, Item 10) and drill one 3/16 inch hole at eight center punched marks
(Figure 10, Item 12, 13, 15, 16, 17, 18, 19 and 20).
14.
Install four strap fastener loops (Figure 10, Item 10) to slide out shelf assembly (Figure 10, Item 14) by
installing eight 11/64 inch blind rivets (Figure 10, Item 11) into mounting holes (Figure 10, Item 9) of four
strap fastener loops (Figure 10, Item 10).
15.
On back side of slide out shelf assembly (Figure 10, Item 14) measure from right edge of slide out
shelf assembly (Figure 10, Item 14) towards left 5.44 inches and from top of slide out shelf assembly
(Figure 10, Item 14) towards bottom 0.78 inches and mark measurement (Figure 10, Item 8).
16.
At marked measurement (Figure 10, Item 8) position right side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 8).
17.
Center punch right and left side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item 10)
onto slide out shelf assembly (Figure 10, Item 14).
18.
On back side of slide out shelf assembly (Figure 10, Item 14) measure from right edge of slide out
shelf assembly (Figure 10, Item 14) towards left 16.69 inches and from top of slide out shelf assembly
(Figure 10, Item 14) towards bottom 0.78 inches and mark measurement (Figure 10, Item 6).
19.
At marked measurement (Figure 10, Item 6) position right side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 6).
20.
Center punch right and left side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item 10)
onto slide out shelf assembly (Figure 10, Item 14).
21.
On back side of slide out shelf assembly (Figure 10, Item 14) measure from right edge of slide out
shelf assembly (Figure 10, Item 14) towards left 26.69 inches and from top of slide out shelf assembly
(Figure 10, Item 14) towards bottom 0.78 inches and mark measurement (Figure 10, Item 4).
22.
At marked measurement (Figure 10, Item 4) position right side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 4).
23.
Center punch right and left side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item 10)
onto slide out shelf assembly (Figure 10, Item 14).
24.
On back side of slide out shelf assembly (Figure 10, Item 14) measure from right edge of slide out
shelf assembly (Figure 10, Item 14) towards left 37.94 inches and from top of slide out shelf assembly
(Figure 10, Item 14) towards bottom 0.78 inches and mark measurement (Figure 10, Item 2).
25.
At marked measurement (Figure 10, Item 2) position right side mounting hole (Figure 10, Item 9) of strap
fastener loop (Figure 10, Item 10) center on marked measurement (Figure 10, Item 2).
26.
Center punch right and left side mounting hole (Figure 10, Item 9) of strap fastener loop (Figure 10, Item 10)
onto slide out shelf assembly (Figure 10, Item 14).
27.
Remove strap fastener loops (Figure 10, Item 10) and drill one 3/16 inch hole at eight center punched
marks (Figure 10, Item 1, 2, 3, 4, 5, 6, 7 and 8).
28.
Install four strap fastener loops (Figure 10, Item 10) to slide out shelf assembly (Figure 10, Item 14) by
installing eight 11/64 inch blind rivets (Figure 10, Item 11) into mounting holes (Figure 10, Item 9) of four
strap fastener loops (Figure 10, Item 10).
001415