Figure 63. Compartment doors, compartment door brace , rear doors, hinged roof panel, and spring shackle access plate, removal
and installation.
(2) Inspect the spring shackle plate for dents,
b, Cleaning and Inspection.
cracks, or other damage. Straighten all
(1) Clean all parts with an approved cleaning
dents. Replace a damaged plate.
solvent and dry thoroughly.
(3) Inspect the mounting hardware for worn or
(2) Inspect the compartment door brace for
damaged threads. Replace as required,
cracks, breaks, or other damage. Replace
c. Installation. Refer to figure 63 and install the
a damaged brace.
spring shackle access plate to the shop set body.
(3) Inspect all hardware for worn or damaged
t breads. Replace as required.
94. Door Lock and Latch Assemblies
c. Installation. Refer to figure 63 and install
a. Removal. Refer to figure G4 and remove the
compartment door brace to the door of the shop set
door lock and latch assemblies from the door of the
body.
shop set body.
93. Spring Shackle Access Plate
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
spring shackle access plate from the shop set body.
(2) Inspect the rear door mounting angle for
b. Cleaning and Inspection.
cracks, breaks, and other damage. Replace
(1) Clean all metal parts with an approved
a damaged or defective mounting angle.
cleaning solvent and dry thoroughly.
88
TACO 5672-.4
