Cleaning and Inspection. - TM-5-4940-200-120109

b. CIeaning and Inspection.

(2)

(1) Clean all metal parts with an approved

cleaning solvent and dry thoroughly.

(2) Inspect, the fuel access door for dents,

(3)

cracks, breaks, weaks springs, or other

damage. Straighten all dcnts and replace a

damaged door. Rcplace a weak spring.

(4)

c . Installation. Refer to figure 62 and install the

damaged threads. Replace as required.

f u e l access door to the shop set body.

c. Installation. Refer to figure 63 and install the

91. Compartment Doors, Rear Doors, and

compartment doors, rear doors, and hinged roof"

Hinged Roof Panel

panel to the shop set body.

u. Removal. Refer to figure 63 and rcmove the

92. Compartment Door Brace

compartment doors, rear doors, and hinged roof

panel from the shop set body.

a. Removal. Refer to figure 63 and remove the

b. Cleaning and Inspection.

compartment door brace from the door of the shop

set body.

(1) Clean all parts I with all approved cleaning

TAGO 5672-.4