b. Cleaning and Inspection.
(2) Refer to figure 72 and remove the Oxgen
(1) Clean all parts with an approved cleaning
cylinder rack from the shop set body.
solvent and dry thoroughly.
(2) Inspect the hanger bracket and clip for
b. Cleaning and Inspection.
dents and cracks. Replace damaged parts,
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect the oxygen cylinder rack for dents
hanger bracket and hanger bracket clip to the shop
or cracks, Replace damaged rack,
set body.
c. Installation,
105. Oxygen Cylinder Rack
(1) Refer to figure 72 and install the oxygen
a. Removal.
cylinder rack to the shop set body.
(1) Remove the oxygen cylinder retaining
(2) Install the oxygen cylinder retaining plate
plate and bracket (par. 103).
and bracket (par. 103).
Figure 72, Oxygen cylinder rack, removal and installation.
96
TACO 5672-A
