102. Fuel Tank Inspection Plate
c. Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
fuel tank inspection plate from the floor of the shop
(2) Inspect the tailgate and tailgate latch for
set body.
cracks, dents, breaks, or other damaged.
Straighten all dents and replace a damaged
tailgate and tailgate latch.
(3) Inspect fill mounting hardware for worn or
damaged threads. Replace as required.
d. Reassembly. Refer to figure 68 and reassemble
the tailgate and tailgate latch in reverse order.
c. Installation. Refer to figure 67 and install the
tailgate and tailgate latch to the shop set body.
101. Lifting Access Door
a. Removal. Refer to figure 69 and remove the
lifting access door from the floor of the shop set
body.
installation.
b. Cleaninq and Inspection.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect the fuel tank inspection plate for
dents or cracks.
R e p l a c e a damaged
inspection plate.
c. Installation. Refer to figure 70 and install the
fuel tank inspection plate.
Bracket
oxygen cylinder retaining plate and bracket from
the shop set body.
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect the retaining plate and bracket for
dents and cracks. Replace damaged parts.
c. Installation. Refer to figure 71 and install the
b. Cleaning and Inspection.
oxygen cylinder retaining plate and bracket to the
(1) Clean the parts with an approved cleaning
shop set body.
solvent and dry thoroughly.
(2) Inspect the lifting access door for dents
104. Hanger Bracket
and cracks. Straighten all dents. Replace
a damaged door.
c. Installation. Refer to figure 69 and install the
hanger bracket and hanger bracket clip from the
lifting access door to the floor of the shop set body.
shop set body.
94
TAGO 5672-A
