(2) Refer to figure 73 and remove the fitting
drawer lockbar from the Model CMU-5
shop set body in a similar manner.
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect the fitting drawer lockbar and door
stop bracket for dents or cracks. Replace
damaged parts.
c, Installation.
(1) Refer to figure 73 and install the fitting
drawer lockbar and door stop bracket to
the Model SECM shop set body.
(2) Refer to figure 73 and install the fitting
drawer lockbar to the Model CMU-5 shop
set body in a similar manner.
108. Control Panel Screen
a. Removal. Refer to
figure 74 and remove the
74. Control panel screen, removal and installation.
control panel screen from the shop set body,
98
TAGO 5672-A