b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Clean all parts with a cloth dampened
(1) Clean all parts with an approved cleaning
an approved cleaning solvent dry
solvent and dry thoroughly.
thoroughly.
(2) Inspect the control panel screen for holes,
dents, and cracks. Replace a damaged
(2) Inspect the straps for wear and the strap-
fastener loops for cracks. Replace worn or
screen.
c. Installation. Refer to figure 74 and install the
damaged parts.
control panel screen to the shop set body.
c. Installation. Refer to figure 75 and install the
straps and strap-fastener loops to the shop set body.
109. Toolbox Supports
a. Removal. Refer to
figure 75 and remove the
111. Tool Brackets
toolbox supports from the shop set body.
c. Removal. Refer to
figure 76 and remove the
b. Cleaning and Inspection.
tool brackets from the shop set body.
(1) Clean the supports with a cloth dampened
h. Cleaning and Inspection.
with an approved cleanling solvent and dry
(1) Clean all parts with an approved cleaning
thoroughly.
solvent and dry thoroughly.
(2) Inspect the toolbox supports for splits and
(2) Inspect tool brackets for dents and cracks.
cracks. Replace damaged supports.
Replace damaged brackets.
c. Installation. Refer to figure 75 and install the
c. Installation. Refer to figure 76 and install the
toolbox supports to the shop set body.
tool brackets to the shop set body.
110. Straps and Strap-Fastener Loops
112. Tool Clips
a. Removal. Refer to
figure 75 and remove the
a. Removal. Refer to
figure 76 and remove the
straps and strap-fastener loops from the shop set
tool clip from the shop set body.
body.
99
TACO 5672-A