TM 1-4920-438-13&P
0040 00
INSPECTION OF INSTALLED ITEMS CONTINUED
SHELF CABINET (E) CONTINUED
1.
Inspect cabinet assembly and work surface (Figure 5) for damage. Replace as necessary.
2.
Inspect all cabinet assembly hardware (Figure 5, Item 1, 2, 3, 4, 8 and 9) for rust, cracks and rounded heads.
Replace as necessary.
REMOVAL
SHELF CABINET (E)
1.
Remove kick plate (Kick Plate , REMOVAL).
2.
Remove drawers, slides, and shelves as necessary (Drawers, Slides, And Shelves, REMOVAL).
3.
Remove hardware attaching cabinet (E) (Figure 5, Item 6) to shelter loor IAW WP 0041 00, Cabinet E, F and
G Hardware, REMOVAL.
4.
Remove eight bolts (Figure 5, Item 1), eight lock washers (Figure 5, Item 2), six large lat washers (Figure 5,
Item 3), and two small lat washers (Figure 5, Item 4) detaching work surface (Figure 5, Item 5) from cabinet
(E) (Figure 5, Item 6).
5.
Remove work surface (Figure 5, Item 5) from top of cabinet (E) (Figure 5, Item 6).
6.
Remove four bolts (Figure 5, Item 8), eight lat washers (Figure 5, Item 4), four lock washers (Figure 5, Item
2), and four nuts (Figure 5, Item 9) detaching two cabinet brackets (Figure 5, Item 7) from cabinet (E) (Figure
5, Item 6).
REPAIR OR REPLACEMENT
SHELF CABINET (E)
1.
If cabinet brackets (Figure 5, Item 7) can be repaired by welding, weld damaged area IAW TM 1-1500-204-23.
Repair must not interfere with form, it, or function of cabinet brackets (Figure 5, Item 7).
2.
Paint repaired cabinet brackets (Figure 5, Item 7) IAW WP 0063 00, Figure 6.
INSTALLATION
SHELF CABINET (E)
1.
If a new shelf cabinet (E) (Figure 5, Item 6) must be installed:
a.
On top left side of shelf cabinet (E) (Figure 5, Item 6), measure from front existing bolt hole toward back
12.25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 5, Item 13).
b.
On top back side of cabinet (E) (Figure 5, Item 6), measure from left existing bolt hole toward right 13
inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement mark and
mark measurement (Figure 5, Item 10).
c.
On top right side of cabinet (E) (Figure 5, Item 6), measure from front existing bolt hole toward back
12.25 inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement
mark and mark measurement (Figure 5, Item 11).
d.
On top front side of cabinet (E) (Figure 5, Item 6), measure from left existing bolt hole toward right 13
inches and mark measurement. Measure from side of cabinet 1.625 inches to new placement mark and
mark measurement (Figure 5, Item 12).
e.
Center punch and drill four 13/32 inch holes.
0040 00-11
